I3200 UV DTF ink မြန်မာ

1.i3200 Crystal Label Ink

2. Dangerous goods data

3. Main ingredient list

4. emergency treatment

Different ways of exposure and first-aid methods: Inhalation:

1. Place the contacts in a well-ventilated place immediately;

2. If breathing stops, artificial respiration rescue should be done;

3. Seek medical attention immediately.

Skin contact:

1. After direct contact, immediately clean with soapy water;

2. After contacting the clothes, take off your clothes immediately, and then wash them with soapy water;

3. Seek medical attention immediately.

Eye contact:

1. Immediately Rinse with large amounts of water for more than 15 minutes;

2. Seek medical attention immediately.

Oral access:

1. Do not vomit, seek medical advice immediately.

The most important symptoms and their hazards: ---

Emergency personnel protection: wear anti-permeable rubber gloves to avoid exposure to pollutants.

5. Fire fighting method

General fire extinguishers: carbon dioxide, dry powder, foam and other fire extinguishers.

Possible hazards when fighting the fire: ---

Special fire extinguishing method: water is not suitable for fire extinguishing, but it can spray it to reduce the temperature.

Fire personnel protection: Fire personnel must wear chemical protection protective clothing, and wear self-breathing armor.

6. Leak and treatment methods

Personal precautions:

1. If the leaked products are not completely cleaned up, limit the entry of personnel;

2. It shall be dealt with by trained professionals;

3. Wear appropriate personal protective equipment (goggles, feeding breathing mask, protective gloves).

Environmental precautions:

1. Pay attention to the ventilation in the leakage area;

2. Stay away from the fire source.

3. Notify government environmental protection personnel and agencies

Cleaning method:

1. Do not directly contact with the leaked material;

2. Avoid leaks from entering sewers, ditches or confined Spaces;

3. Prevent leakage under the security permit;

4. A small amount of leakage can be absorbed by oil absorption paper or covered with sand and soil;

5. The contaminated articles are also harmful, and should be placed in a specific container and specially marked;

6. A large number of leaks should be handled by professional institutions;

7. Protect the accident handling personnel, and the accident handling personnel should take adequate personal protective measures.

7. Safe operation and storage methods

Operation:

1. Use of combustible liquid protective storage containers in the workplace;

2. The workplace should be kept away from sparks, fire sources and prevent obvious smoking fire signs;

3. The workplace should be kept well ventilated;

4. Fire-extinguishing equipment shall be prepared;

5. The container should be clearly marked and should be closed when not in use.

Storage:

1. Store in a cool, dry, ventilated and open place without direct sunlight;

2. The storage place shall be far away from the fire source and heat sources;

3. Use a ventilation system and electrical equipment that does not produce sparks and is grounded;

4. Store them in appropriate containers with obvious labels to avoid damage to the container;

5. For containers not used temporarily, empty buckets should be sealed;

6. Fire-extinguishing equipment should be placed in the storage area;

7. Follow the relevant regulations of combustible handling.

8. Exposure precautions

Prevention and control:

1. operate in a specific area well ventilated and far from heat source spark;
2. Close the lid when not in use.

Personal protective equipment: respiratory protection filter tank breathing respirator;

Hand protection: anti-seepage gloves to butyl rubber, nitrile is better;

Eye protection: wear safety goggles;

Body protection: safety test clothing, emergency eye washing device, working shoes.

Hygienic measures:

1. Take off the contaminated clothes after work. After washing can be worn or discarded;

2. Smoking or eating should be strictly prohibited in the workplace;

3. Wash your hands immediately after handling the object;

4. Keep the workplace clean.

9. Physical and chemical characteristics

10. Stability and reactivity

11. Toxicity data

12.Ecological date

Environmental impact: not flowing into the soil, sewer and sewage ponds

13.Waste disposal methods

Waste treatment methods:

1. Reference to the relevant chemical treatment methods;
2. Adopt specific incineration treatment;

14. Transportation data

Domestic transportation regulations:

1. Meet the chemical transportation specifications;

2. Comply with the regulations on the transport of dangerous goods by ship;

3. Compliance with the transport regulations of dangerous goods by air transportation

Special delivery methods and precautions: ---

15. Relevant laws and regulations

Regulations information: dangerous goods safety management regulations (February 17,1987, the State Council), chemical hazardous goods safety management regulations of implementing rules (labor law [1992] 677), workplace safety use of chemicals ([1996] labor hair 423) and other regulations, for the safety of chemical use, production, storage, transportation, loading and unloading have made the corresponding provisions